Hardwood Floor Refinishing in New Jersey

Bring back the floor you already have

Scratches, gray traffic paths, old yellowed finish and water marks usually sit in the top layer of a hardwood floor. Solid hardwood can be sanded down past that damage and refinished, often more than once over its life. That's why refinishing is usually the best value in flooring: you keep the real wood and skip the cost of new material.

How we refinish hardwood floors

1. Walkthrough and estimate

We come to you, measure each room, and check board thickness, loose boards, cupping and stains so you know up front whether refinishing, repair or replacement makes sense.

2. Prep and protection

Furniture comes out, doorways are taped, and plastic goes up so dust stays in the work area.

3. Sanding to bare wood

We make coarse-to-fine passes with a drum sander and an edger along the walls, typically stepping through grits like 36, 60, 80 and 100, so the old finish is fully removed and the surface is smooth.

4. Repairs

Damaged or stained boards are cut out and replaced, and gaps are filled so the floor reads as one surface.

5. Stain or natural

Keep the natural color of the oak, or pick a stain from test patches on your own boards, so there are no surprises.

6. Finish coats

We seal the wood and apply polyurethane coats in the sheen you choose, from matte to gloss, then do a final walkthrough with you.

What we refinish

• Red oak and white oak, all board sizes
• Strip flooring, plank flooring and stair treads
• Landings, hallways and open living areas
• Older floors under carpet that have never been refinished
• Homes, rentals and commercial spaces